Hikvision 8MP AcuSense 4-Camera Turret Kit | BYO HDD

Four 4K AcuSense cameras for a single-storey property, office, or shopfront where you want intelligent alerts and the resolution to ID a face from the recorded footage, not just see that someone was there.

Built for

• Larger residential blocks, multi-tenant commercial sites, and trade premises where the camera is mounted 8–15 m from the action — 4K resolves a face at 25 m where 6 MP starts to soften.
• Sites where the same camera has to serve general surveillance and ID-quality evidence — driveway entries, loading docks, customer-facing counters.
• Insurance- or compliance-sensitive installs (medical, financial, government contractors) where 4K footage materially strengthens evidentiary value.
• Customers committed to Hikvision Pro who want the headroom to install whatever HDD suits their retention needs (BYO drive — see HDD recommendations below).

AcuSense — what it actually does

Cheap motion-detection treats every pixel change as a potential intrusion: wind, weather, headlights, animals, all of it. AcuSense runs an on-camera deep-learning model that classifies humans and vehicles vs everything else. Hikvision claims up to 95% false-alarm reduction. Practical effect: your phone stops crying wolf, so when it does alert you, you actually look. AcuSense also drives smarter NVR-side search — you can scrub 24 hours of footage filtered to "vehicles only" in seconds.

Why 4K matters here, not just on the spec sheet

8 MP/4K gives you four times the pixels of a 2 MP camera and roughly 1.7× a 6 MP. Practical translation: a face is still identifiable at roughly 25 m vs ~15 m on 6 MP, and you can digitally zoom into recorded footage without it falling apart. The trade-off is bandwidth and storage — 4K cameras eat ~30–40% more disk than 6 MP — which is why the recommended HDD sizes step up.

What's in the box, and why each piece is there

• 4 × Hikvision DS-2CD2386G2H-IU 8 MP 4K AcuSense Turret cameras — 3840 × 2160 (4K UHD) at 30 fps, 30 m IR night vision, AcuSense on-camera human/vehicle AI, IP67, f/1.0 aperture (powered by Darkfighter for low light), 108.8° horizontal FOV, built-in microphone.
• 1 × Hikvision DS-7608NI-M2/8P 8-channel Ultra-series NVR — 8 PoE ports built-in, 128 Mbps bandwidth (comfortable headroom for 4K streams), 2× SATA bays for BYO HDD up to 16 TB, AcuSense-aware features, HDMI 4K + VGA output.
• 4 × camera mounting hardware kits + quick-start guide

BYO HDD — what to buy

This bundle ships without an HDD because customers in this segment usually want to pick their own — and 4K storage planning is more consequential than at lower resolutions. Default recommendation: Seagate SkyHawk AI 8 TB (ST8000VE001, $654.99) — AI-tuned firmware suits AcuSense workloads, ~7–10 days retention at 4K continuous on this camera count. Value alternative: WD Purple 4 TB (WD43PURZ, $346.99) for ~5–7 days 4K retention. Add it to your cart from the recommended HDD section below the buy button.

Why this size and not the next one up/down

4-cam vs 6-cam: the 6-cam kit gives you two more lines of sight and still uses the same 8-channel NVR (no new hardware spend on the recorder side). If you have any chance of needing 6+ cameras in the next year, sizing up now avoids buying extra cameras later at individual pricing.

Specifications

You'll need to supply

• Surveillance-grade HDD — recommended: Seagate SkyHawk AI 8 TB (ST8000VE001, $654.99) — AI-tuned firmware suits AcuSense workloads, ~7–10 days retention at 4K continuous on this camera count. See HDD section above.
• Cat6 ethernet from NVR to each camera — we stock the Hikvision Cat6 305 m spool (DS-1LN6UZC0-BLUE, $289.99) and StarTech Cat6 RJ45 plugs (CRJ45C6SOL50, $49.99). One spool covers most 4-cam installs.
• Monitor with HDMI 4K input for full-resolution local NVR viewing.
• Internet router for Hik-Connect remote access.
• Drill + masonry bits for camera mounting.

Saving vs buying separately

Components individually: $639.99 (NVR) + 4 × $269.99 (cameras) = $1719.95. Bundle price: $1633.95. You save $86.00.