Now Open: Shop High-Quality Security Cameras & CCTV Systems in Australia – Fast Shipping!

Fresh CCTV & Surveillance Gear Added Every Day – Check Out What’s New!

Free shipping on all orders over $500

Hikvision UPS

Hikvision UPS units provide battery-backed power protection for Hikvision NVRs and the connected PoE switching and camera estate — sized appropriately for the typical NVR + PoE switch load, line-interactive topology for clean voltage regulation, and runtime budgets in the 10-30 minute range for graceful recording continuity through brief mains outages. Buying a brand-matched Hikvision UPS makes sense when you want the warranty, support and load-sizing alignment to come from one supplier — particularly useful for customers buying a complete Hikvision system package.

Security Cameras Australia stocks the Hikvision UPS range. Every UPS is genuine Australian stock with full manufacturer warranty.

For broader UPS options across brands see the UPS parent collection, or specifically APC, Eaton, or PowerShield. For the broader Hikvision range see the Hikvision parent collection.

View as

What a UPS does for a CCTV install

  • Continues recording through brief outages. Brownouts, storm-related dropouts, switching events — the UPS battery covers the gap so the NVR keeps recording without rebooting.
  • Protects against surges. Voltage spikes from lightning or grid switching damage NVR and PoE switch electronics. UPS surge suppression absorbs the spike before it reaches the connected equipment.
  • Graceful shutdown on extended outages. When the battery does deplete, the UPS signals the NVR to shut down cleanly rather than just losing power mid-write — protecting the hard drive from corruption.
  • Voltage regulation (line-interactive models). Compensates for sustained over- or under-voltage from the mains supply without using battery — extends battery life and protects equipment from sustained out-of-spec voltage.

Sizing for a Hikvision system

Two budgets matter:

  • Power capacity (VA / W). Total wattage of NVR + PoE switch + connected cameras. A typical 8-channel NVR with built-in PoE drawing ~50 W needs a UPS rated significantly above the load to handle inrush and provide runtime. The Hikvision UPS range is sized for typical 4-, 8- and 16-channel NVR loads — match the UPS model to the NVR class.
  • Runtime budget. How long should the system run on battery? 10 minutes covers most short outages and gives graceful shutdown headroom. 20-30 minutes covers longer outages and provides realistic continuity for monitored sites. Beyond 30 minutes, consider a larger UPS or auxiliary battery pack.

Hikvision-branded UPS vs APC/Eaton/PowerShield

Practical reality: most third-party UPS brands (APC, Eaton, PowerShield) cover the same use cases as the Hikvision UPS at competitive prices and often broader model ranges. The reasons to specifically choose a Hikvision UPS:

  • Single-supplier warranty and support. If something goes wrong, one supplier covers the NVR, cameras and UPS — simpler RMA path.
  • Load-sizing alignment. Hikvision UPS models are explicitly sized against Hikvision NVR power profiles — no guesswork.
  • System-package consistency. For commercial procurement preferring a unified brand stack.

For most installs, choosing between Hikvision UPS and a same-spec APC, Eaton or PowerShield comes down to price and availability rather than functional difference.

Why buy from Security Cameras Australia

  • Authorised Hikvision dealer · full manufacturer warranty.
  • Expert support · advice on UPS sizing for your specific Hikvision system, runtime budget, and topology selection.
  • Price-match · free shipping · 30-day returns.

Shop the Hikvision UPS range

Browse below, or compare against APC, Eaton, PowerShield, or the full UPS parent collection.

Frequently Asked Questions about Hikvision UPS

Do I need a UPS for a Hikvision CCTV system?

For any install where recording continuity through brief outages matters — almost always yes. Without a UPS, every mains dropout cuts recording until the NVR boots back up (2-5 minutes), and the NVR hard drive is at risk of corruption from unclean shutdowns. A modest UPS adds proportionately small cost to a system install while substantially improving recording reliability and hard drive longevity.

How long should the UPS hold the system up?

Sized to use case. Residential/small-commercial covering most brief outages: 10-15 minutes. Continuous-recording installs where short-term coverage matters: 20-30 minutes. Critical commercial installs with longer runtime requirements: pair the UPS with auxiliary battery packs or consider a larger UPS. For multi-hour runtime, factor a generator into the install.

Will a Hikvision UPS power both the NVR and the cameras?

Yes — the UPS powers the NVR, and if the NVR has built-in PoE ports, the cameras connected to those ports run on UPS power as well. For installs with a separate PoE switch, plug both the NVR and the switch into the UPS. Confirm the total wattage stays within the UPS capacity.

What's the difference between a Hikvision UPS and an APC or Eaton at the same spec?

Functionally similar for most CCTV use cases — line-interactive topology, surge suppression, USB signalling for graceful shutdown. The Hikvision UPS is explicitly sized against Hikvision NVR power profiles which removes some sizing guesswork; APC/Eaton/PowerShield offer broader model ranges and often competitive pricing. For single-brand procurement preference: Hikvision UPS. For broader options: see the <a href="/collections/uninterruptible-power-supply">UPS parent collection</a>.

Do I need to replace UPS batteries?

Yes — UPS batteries have a finite life. Typical UPS battery life is 3-5 years depending on environmental conditions (heat shortens battery life significantly), discharge cycles, and battery quality. Most Hikvision UPS units include battery health monitoring with replacement alerts. Plan for battery replacement as a routine maintenance item.
Back to top

Compare /5