Shop All Security Cameras & Systems

Security Cameras Australia is the integrated-security specialist for Australian homes, businesses and institutions — over 1,600 products across CCTV, recorders, alarms, intercoms, access control, network gear and power protection, sourced from authorised dealer relationships with Hikvision, Axis, Hanwha, HiLook, IDIS, TruVision, Ajax, APC, Eaton and other major brands. The catalogue spans entry-tier residential through enterprise commercial and government — single-camera home installs through 64-channel campus deployments — with expert specification support across every tier. Whether you're a homeowner picking a 4-camera kit, a builder specifying a commercial install, a body corporate planning a strata system, or an IT integrator scoping enterprise CCTV with VMS integration, the right system is here. We're not a marketplace reselling whatever ships — every product is genuine Australian stock with full manufacturer warranty, supported by people who understand the difference between AcuSense and Object Analytics, between PoE+ and PoE++, between IP66 and IP67.

Browse by what you need: brand, camera type, kit size, environment, or use case. Shop pre-built kits by type — turret, bullet, dome, PTZ, panoramic — by feature — AcuSense, ColorVu, active deterrence — or see all in Security Camera Systems. Or talk to us — for installs above the residential tier, we'll specify the system with you rather than leave you to guess.

What we stock and who we sell to

Residential homeowners

From single doorbell cameras through whole-home 8-camera kits with AcuSense AI alert filtering and ColorVu colour night vision. DIY-installable for typical single-storey homes; professional install referrals for two-storey or complex sites. Start with kit collections or browse by camera count: 4-camera, 6-camera, 8-camera systems.

Builders and trades

System specification for new builds and renovations across residential and commercial. Cable runs, recorder sizing, PoE switching, hard drive selection — all spec'd against the build. Builders working multiple sites benefit from standardised specifications across the portfolio.

Body corporates and strata

Multi-tenant intercom retrofit (2-wire IP-over-twisted-pair preserves existing risers without re-cabling), common-area CCTV, controlled-entry access systems. Specified against strata-scheme requirements and privacy considerations.

Small and mid commercial

Shop, café, professional office, small clinic, light-industrial through to multi-zone retail anchor, multi-floor commercial, mid warehouse. Right-tier recorder, mixed camera spec for different position types, integration with POS, alarm and access control where relevant. See Security Cameras for Business.

Enterprise and institutional

Large commercial, education campus, healthcare facility, hospitality venue, multi-site retail chain, industrial site at scale, government and infrastructure. VMS integration (Milestone, Genetec, AXIS Camera Station, Hanwha WAVE), structured cabling with managed PoE switching, NDAA-compliant equipment where procurement requires it, tender-grade documentation. Designed solution rather than off-the-shelf — talk to us about the install context.

Browse by what you're solving

Browse by brand

Hikvision — the broadest range, value-to-enterprise
Axis — NDAA-compliant premium
Hanwha — commercial NDAA-positive
HiLook — Hikvision-family value tier
IDIS — NDAA-compliant Korean professional
TruVision — Interlogix-family commercial
TP-Link Tapo — consumer DIY

Browse by camera type

Turret — general perimeter
Bullet — long-range outdoor
Dome — vandalism-resistant
PTZ — active wide-area
Panoramic / Fisheye — single-camera room coverage

Browse by resolution

4MP — the residential standard
6MP — better identification headroom
8MP / 4K — long distances and plate work

Browse by environment

Outdoor
Indoor
Wireless
Solar / 4G — for off-grid sites

Browse by use case

Browse by what you need beyond cameras

Browse by procurement context

NDAA-compliant cameras — for federal, defence, education and procurement-restricted contracts

How to choose if you're starting from scratch

Three decisions drive most installs:

1. How many cameras and what resolution

Most residential installs land at 4-8 cameras at 4-6MP. Most commercial installs at 8-32 cameras at 4-8MP. Resolution scales storage; storage scales NVR. We size the system honestly rather than overspecifying.

2. What AI features matter

AcuSense (Hikvision) / Object Analytics (Axis) human and vehicle filtering cuts false alerts up to 95% — essential at every outdoor position. ColorVu / Lightfinder full-colour night vision matters at front-of-house and identification positions. DeepinView / advanced analytics for retail footfall, facial recognition, behaviour analytics where the analytics output drives operational decisions.

3. Whether the install integrates with anything else

Stand-alone CCTV is simpler. Integrated CCTV (access control, alarm, POS, VMS, BMS) delivers more operational value but specifies differently. Confirm the integration paths at specification time, not after install.

Why buy from Security Cameras Australia

Authorised dealer for Hikvision, Axis, Hanwha, HiLook, IDIS, TruVision, Ajax, APC, Eaton and other major brands. Genuine Australian stock with full manufacturer warranty.
Specialist support — we know the products we sell, installer-credible advice on specification, integration and install considerations.
NDAA-aware procurement support — tender documentation, compliance statements, brand pivots between NDAA-positive and value-tier options as the procurement context requires.
Installer referrals — qualified installer network for sites needing professional install beyond DIY.
Price-match · free shipping · 30-day returns.

Start anywhere

Browse the catalogue below, or pick a category above. For installs at scale or with integration requirements, talk to us — we'll specify the system with you rather than leave you to guess.

Frequently Asked Questions about Shop All Security Cameras & Systems

Where should I start if I don't know what I need?

Three quick orientation questions. (1) Residential or commercial? Residential: start with the <a href="/collections/home-security-cameras">home security cameras</a> page or a kit collection. Commercial: start with <a href="/collections/security-cameras-for-business">security cameras for business</a> or a specific use case (retail, office, warehouse). (2) Existing cabling or new install? New install with no existing cable: IP cameras + NVR is the modern standard. Existing coax cabling: DVR-based HD-TVI is the right call. (3) Any procurement restrictions? Federal/defence/restricted contexts need NDAA-compliant equipment — see <a href="/collections/ndaa-compliant-cameras">NDAA-compliant cameras</a>. For installs above the residential tier, talk to us and we'll specify.

What brands do you stock and why those?

Authorised dealer for Hikvision (the broadest range, value-to-enterprise), Axis (NDAA-compliant premium), Hanwha (commercial NDAA-positive), HiLook (Hikvision-family value tier), IDIS (Korean NDAA-positive professional), TruVision (Interlogix-family), TP-Link Tapo (consumer DIY), Ajax (the leading wireless alarm brand), plus APC, Eaton, PowerShield for UPS and other category brands. We choose brands by professional credibility, support, and the value they deliver in their tier — not by margin. The brand list spans NDAA-positive and value tiers so we can specify against any procurement context.

Do you install, or just supply?

We supply with expert specification support — DIY-friendly for residential, installer referrals for professional installs. For builders, body corporates, commercial installs and any site beyond accessible DIY, we have qualified installer relationships across Australia. The model: we spec the system with you (parts, configuration, integration paths), supply the kit with manufacturer warranty, and refer to a qualified installer for the install. For enterprise and institutional installs, we work with IT integrators and security designers on system specification rather than install delivery.

Will the cameras work with my existing recorder, or do I need a whole new system?

Depends on what you have. Existing IP cameras + NVR: most ONVIF-compliant cameras work across brands at basic level, brand-specific features (AcuSense, ColorVu, Object Analytics) typically need same-brand NVR for full feature surface. Existing analog or HD-TVI cameras: keep the cameras, replace the DVR with a current Hikvision Turbo HD or HiLook DVR — auto-detects analog/AHD/HD-TVI per channel. Mixed installs: hybrid DVRs accept some IP channels alongside coax. Tell us what you have and we'll spec the upgrade rather than push a whole-system replacement.

What if I'm not sure what's right for my install?

Talk to us — that's what specialist support is for. Tell us what you're trying to do (residential perimeter, retail loss prevention, school campus, commercial multi-floor), what you have (existing cabling, brand standardisation, procurement constraints), and what matters operationally (false-alert tolerance, night identification requirements, integration with other systems, retention period). We'll come back with a specified system rather than a parts list. For most installs, the specification conversation takes 15-30 minutes and saves significantly more than that in install time and avoided spec errors.